Till date erection of radial gate frame has been completed. Fabrication of steel plate for extension of bed load sluice culvert has been completed by the HM Contractor and the erection process has been going on along with the welding process. Fabrication of steel pipes is ongoing. A total of 96 approach pipes (100%) has been rolled and welded. Erection of steel lining at breast wall section of undersluice has been completed. Fabrication of 3 units of bends of headrace pipe and 4 units of bends of branch pipes has been completed along with Visual Testing, DPT Testing as well as UT Testing. Rolling of bifurcation 01 and 02 have been completed using the materials provided by the Employer. Further, the fabrication of bifurcation 03 is being carried out by the contractor at his factory in Pokhara. All four units diffuser have been fabricated as well as installed. The HM Contractor has been carrying out the fabrication works of bends and penstock pipes at his workshop and completed the fabrication of almost 63 number of penstock pipes out of required 103.
Currently, interface works are being carried out at the Powerhouse. Steel lining work remaining at few work fronts will be done on the remaining area i.e. gravel flushing culvert once the work front is made available by the Civil Contractor. Also, the fabrication works of intake gates and radial gates are under process at the factory of the contractor located in Pokhara.